Diamond/Ceramic 4 Rod TurnBox Crock Stick® Knife Sharpener
The Turn Box family is a very stable and compact knife sharpening system. It works well in the kitchen and it quickly breaks down for storage in a drawer. The turn box family of knife sharpeners is also great for outdoorsmen on the go because it is lightweight and stores easily into a backpack. It only takes a few swipes to maintain an edge (a bit more if you have a really dull knife). 

There are two pre-set knife sharpening angles in the wood block 20 degree & 25 degree.

  • 25 Degrees - This is used for hunting, camping, utility and chef's knives and provides a sharp, durable edge.
  • 20 Degrees - This is used for those desiring a very sharp edge. Some examples would be for slicing, fillet, butcher, paring and skinning knives. Lower degrees result in sharper knives, but require more regular maintenance.

This 2-Stage Knife Sharpening System features a hardwood turnbox with internal rod storage in the base, two 5" long medium diamond rods (400 grit) for extremely fast sharpening, and two 5" long fine ceramic rods (1000 grit) for polishing. 

Instructions
USING YOUR TURNBOX

The silver Diamond Rods are for sharpening, and the white Ceramic Rods are for polishing.

Set Up- Always begin by placing the turn box on a stable and flat surface at a comfortable working height.

1 Stage  Sharpening

Step 1- Choose the type of rods and the angle that you wish to sharpen with (20° or 25°) by placing the sharpening rods in the appropriate guide holes.

Step 2- Hold the base firmly with your non-dominant hand. Make sure your fingers are as far away from the rods as possible while maintaining a firm, controllable grip on the base.

Step 3- With the knife in your dominant hand, place the heel of the blade (closest to the handle) an inch or more below the top of one of the rods.

Step 4- Holding the blade straight up and down (perpendicular to the work surface), draw the blade down the rod and towards you, moving towards the tip of the knife. The motion is similar to slicing bread.

Step 5- Repeat this action on the other rod for the other side of the edge.

Step 6- Continue alternation from rod to rod until you have achieved the desired sharpness.

2 Stage Sharpening

Step 1- Begin by placing the rods in the 20º angle holes and follow the sharpening instructions as listed in the 1-stage sharpening above, but do not polish/finish the edge, use only 10-12 strokes on each rod. This is to thin the blade’s edge.

Step 2- After thinning the blade’s edge, move the rods to the 25° angle holes for the 2nd stage sharpening to finish the edge. Simply follow the same technique used before. This will produce a durable and sharp compound bevel.

Pro Tip**- For the best results, avoid rolling the tip of your knife off the rod. This can damage the tip and leave it duller than the rest of the blade. Patience and a slow hand are recommended.

  • 4 Sharpening Rods
  • Sharpener Angles: 20°/25°
  • 2 Medium Grit 5" Diamond Rods (400 Grit)
  • 2 Fine Grit (white) 5" Aumina Ceramic Rods (1000 Grit)
  • Hardwood Turnbox with internal Rod storage
  • New in Blister Pack
  • Made in China
SKU LS54
Model # TB-2D2C
Barcode # 080999037508
Brand Lansky
Shipping Weight 0.3200kg
Shipping Width 0.127m
Shipping Height 0.035m
Shipping Length 0.240m
Shipping Cubic 0.001067000m3
Unit Of Measure ea

Lansky Sharpeners are the most recognized name in knife sharpening worldwide. In addition to their legendary Controlled-Angle Sharpener System they continue to develop new sharpening technologies and innovations for: hunting and outdoor sports, kitchen use, as well as the workshop. They are are known for their hunting knife sharpeners and precision sharpening kits.

BUY with Confidence!

Knife Supplies (previously known as Tassienerida Knives) has been selling online since 2004.

All our products are 100% GENUINE and supplied in original packaging with warranty and a full money back guarantee. We are an Australian Registered Business with current ABN and GST registration and we provide TAX Invoices with all purchases. Please refer to our detailed Returns Policy available from the home page.

Be The First To Review This Product!

Help other Knife Supplies Australia users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought
Dan's Whetstone Honing Oil for Knife Sharpeners

This honing oil is a light mineral oil that helps keep your stone pores from getting clogged. The oil is necessary to maintain the effectiveness of your stone. In addition, it is a good all purpose lubricant for many of your household needs.

$16.95

More From This Category