The full edge-to-edge uninterrupted diamond surfaces on the benchstones make for quicker, more efficient sharpening, at a high value.

The Coarse Red Side (120 grit) will aggressively repair and recondition damaged or dull blades, even works to put an edge where there wasn't before. While the Fine Red Side (600 grit) will produce and maintain a micro-serrated working edge, polishing away the heavy scratches from lower grit stones.  The 600 grit stone produces a working edge that is adequate for nearly any task, especially cutting cardboard. 

A great addition to any craftsman’s workshop, the diamond abrasives on the benchstones are excellent for repairing and maintaining a large range of tools from dull and damaged kitchen knives, to well maintained woodworking chisels.

 

Instructions
USING YOUR DOUBLE SIDED DIAMNOND BENCHSTONE

Step 1- Select the proper sided of the stone for your edge.

Coarse- To reprofile a completley dull or damaged edge
Fine- To hone/polish a finished edge or for daily manitainance
Step 2- Set the  Benchstone base on a stable, flat surface with the stone you have selected facing up.

Note- Lubrication of any kind is not recommended while sharpening on any of the two stones. DO NOT USE HONING OIL ON THE DIAMOND STONE.

Step 3- Observe the bevel angle on the blade you intend to sharpen.  Then, bring the edge to the stone matching your sharpening angle to the bevel angle.

Step 4- Using light pressure, push the edge of the blade across the stone in one motion, much like trying to slice a thin layer off the top of the stone. Maintaining a consistent angle is essential for the best results.

Step 5- Repeat process 3-4 times on one side of the blade then switch to the other side and repeat.

Step 6- Repeat this process until edge is sharp then progress to finer stones and repeat.

Step 7- Clean your stones.

Clean the Diamond stone with a damp rag after each use.

Suggestions

1. Use a series of stones for the best results. For an undamaged edge start with the Medium Diamond Stone

2. Start with your selected stone. Use 3-4 strokes on one side of the blade. Repeat process on the other side of the blade. Repeat this whole process, switching between sides, about 3-4 times. 

3. Then use only 2 strokes per side.  Repeat this process 2-3 times. 

4. Then 1 stroke per side.  Repeat this process 1-2 times.

5. Move on to a finer stone.

• 6"x2" Coarse Grit (120) Red Side
• 6"x2" Fine Grit (600) Blue Side
• Sharpener Material: Diamond
• Dimensions: 6" x 2"
• Base/Handle Material: Plastic/Rubber
• Non-slip Base/Optional Mounting
• New in Blister Pack
• Made in China

SKU	LS09540
Model #	DB1260
Barcode #	080999095409
Brand	Lansky
Shipping Weight	0.4400kg
Shipping Width	0.140m
Shipping Height	0.050m
Shipping Length	0.300m
Shipping Cubic	0.002100000m3
Unit Of Measure	ea

Lansky Sharpeners are the most recognized name in knife sharpening worldwide. In addition to their legendary Controlled-Angle Sharpener System they continue to develop new sharpening technologies and innovations for: hunting and outdoor sports, kitchen use, as well as the workshop. They are are known for their hunting knife sharpeners and precision sharpening kits.

BUY with Confidence!

Knife Supplies (previously known as Tassienerida Knives) has been selling online since 2004.

All our products are 100% GENUINE and supplied in original packaging with warranty and a full money back guarantee. We are an Australian Registered Business with current ABN and GST registration and we provide TAX Invoices with all purchases. Please refer to our detailed Returns Policy available from the home page.

Help other Knife Supplies Australia users shop smarter by writing reviews for products you have purchased.

Write a product review